Multi-Service Multiplexer Access Network can be applied to VoIP Access Gateway and ADSL/ADSL2/ADSL2+/SHDSL/VDSL Broadband Access. Designed with user-friendly interface for easy operation. Can't wait to hear from you. Contact us!
OPNET Technologies presents Multi-Service Multiplexer Access Network, keeping with the current trend of full integration in the migration of IP and broadband.
It can be configured to deploy a wide range of narrowband and broadband voice and data applications, to subscribers over a copper wire-line network infrastructure.
It can be deployed in central office as well as remote outdoor node applications. It enables migration from legacy TDM network to IP-Based Next Generation Network. It provides operators with maximum flexibility for service access, enabling efficient and effective deployment of new services without the need for additional investment in infrastructure.
※Product Application:
ULC-1000AN MSAN provides VoIP voice access Service with the Softswitch platform. Its expansible capacity enables service operators to provide extensive local and long-haul calls on IP-Based Next Generation Network, and flexibly enables fast and convenient service deployment.
ULC-1000AN MSAN supports variety types of DSL interfaces for broadband service access; flexibly provisioning different data-rates and services according to customer requirements.
※Product Features:
- Combination of Traditional TDM Services and IP-Based NGN Services in a Single Universal Platform
- Integrate High speed and Reliable Transmission System
- High Density, Flexible and Scalable Modularized System Design
- Comprehensive NMS Features for Access Network Management
- An easy way of migration from TDM network to NGN network
- Key applications critical to consumers by a single platform
- Protect the values of existing equipment investment
- Lower capital investment and network operation cost
- Increase Average Revenue Per User (ARPU) by introducing new value-added services.
※TDM-Based Features:
- Open PSTN interfaces: V5.2 and 2-wire analog, connections to any LE switch for TDM POTS applications
- Analog Leased Line with or without E&M Signaling
- Multi-rates Data Leased Line with different kinds of interface, V.11, V.28, V.35, or G.SHDS
- DS0 level fully non-blocking cross-connect and grooming.
※VoIP Access Features:
- Comply with standardized IP-based control protocols, H.248 / MGCP / SIP
- Bi-directionally convert voice formats between TDM-based PCM payload and IP-based G.711, G.723, G.726 or G.729 payload
- Echo-cancellation mechanism
- Voice Activation Detection (VAD)
- Comfort Noise Generation (CNG)
- T.38 Fax over IP functionality
- Co-existing with V5.2 POTS Network Interface in a single system.
※Broadband Access Features:
- Variety of xDSL Access Interfaces: ADSL / ADSL2 / ADSL2+/ G.SHDSL / VDSL
- Variety of Network Interface: ATM E1 IMA, ATM-based STM-1 for ATM-Based Network, Fast Ethernet (FE) or Gigabit Ethernet (GE) for IP-Based Network
- Integrated L2 Switch Features for Advanced Data Services
- Built-in POTS Splitter on board to simplify MDF cross-connection.
※Integrated Transmission System:
- Variety of Transmission Interfaces: E1, E3, G.SHDSL Electrical, STM-1/4 Optical, or GE Optical
- Variety of Network Topologies: Point-to-point, Linear, Star, Ring or Hybrid
- Fast Recovery from Network Fault by Network Protection Switch.
※Scalable System Capacity from Small, Medium to Large Network Management and Maintenance:
- Comprehensive network management Features: CM, PM, FM, SM and Inventory
- Management for overall Access Network
- Integrate line testing features for easy maintenance
- Scalable management capacity for different size of access network
- User-friendly interface for easy operation.
※Product Specifications:
Uplink Interface
- Gigabit Ethernet Optical, 1000Base-SX, LX, LH, ZX, SFP Module
- Gigabit Ethernet Electrical, 100/1000Base-T
Subscriber Line Interface and Units
- RI-POTS2: 48-port FXS POTS line card
- RI-POTSCA: 72-port FXS POTS line card
- ATU-C2: 48-port ADSL/2/2+ line card
- ATU-CS: 48-port ADSL2+ Line Interface with built-in Splitter
- VTU-C: 24-port VDSL2 line card
- VTU-CS: 24-port VDSL2 line card with built-in splitter
- PRI12S: 12-port ISDN PRA E1/T1 line card
- TDMoE8: 8-port E1/T1 Pseudo Wires line card
- TDMoE12: 12-port E1/T1 Pseudo Wires line card
Subscriber Line Card Connection
- 24-port 50-pin RJ-21 connector
Management Interfaces
- 1 x RS-232 DB-9 console port
- 1 x FE RJ-45 EMS out-band management
- Support In-band management
- 2 x RJ-45 Alarm contacts I/O
Operating Environment
- Operating conditions: -10 to 60°C(14 to 149°F)
- Non-Operating conditions: -10 to 85°C( 14 to 185 °F )
- Relative Humidity: 5% to 95 %
- Storage Humidity: 5% to 95 %
- Regulatory Safety Compliance
- EMC: CE: EN550221 class A & EN300386 V1.3.2
- Safety: EN60950-1
- MTBF: 55,000 hours
- MSA Chassis Dimensions (w/d/h)
- 486*340*477 mm, 13U Height
- 2 CPUC slots, 2 MGUM slots, 15 Service Slots
- Net weight: 22kg; Weight (Full equipped): ~44K
- MSB Chassis Dimensions (w/d/h)
- 486*340*572 mm,, 7.5U Height
- 2 CPUC slots, 2 MGUM slots, 8 Service Slots
- Net weight: 15kg; Weight (Full equipped): ~25Kg
- MSG Chassis Dimensions (w/d/h)
- 487*314*135 mm, 3U Height
- 1 CPUC slots, 1 MGUM slots, 4 Service Slots
- Net weight: 6.8kg; Weight (Full equipped): ~15Kg
- MS7 Chassis Dimensions (w/d/h)
- 483*362*222 mm, 5U Height,
- 1 CPUC slots, 1 MGUM slots, 7 Service Slots
- Net weight: 10kg; Weight (Full equipped): ~20Kg
- MSE Chassis Dimensions (w/d/h)
- 594*314*196 mm, 4.5U Height
- 1 CPUC slots, 1 MGUM slots, 5 Service Slots
- Net weight: 9kg; Weight (Full equipped): ~15.5Kg
- MSM Chassis Dimensions (w/d/h)
- 487*320*112 mm, 2.5U Height
- 1 CPUC slots, 2 Service Slots
- Net weight: 7.6kg; Weight (Full equipped): ~11Kg
- Power Requirement DC: -42V ~ -60V DC
